ZDC ARTCC :: SOPs and LOAs :: VATSIM's Jacksonville ARTCC

The following procedures should be used by the appropriate Enroute/Center controller for aircraft entering ZDC airspace for arrival at the following fields:

KRDU cross BUZZY at 11,000

KFAY Sector boundary at 10,000

KILM cross CHAMS at 10,000

Simulation Rate:

All aircraft shall be at 1X at the ZJX/ZDC boundary unless the next sector controller has approved otherwise.

VRC Functions:

Modify all datablocks to indicate /t, /r or /v as appropriate.

Modify all flightstrips to reflect the appropriate route.

Clear all scratchpad and temp. altitudes prior to placing a handoff request.

NORDO:

Aircraft that you are not in communication with are pointed out PRIOR to crossing the appropriate ARTCC boundary.

Print this | Send this |

This is the web site of the Jacksonville (ZJX) ARTCC that is part of the VATUSA division of the VATSIM simulated air traffic control network. This site is in no way affiliated with the FAA's Jacksonville ARTCC, nor with the NATCA's ZJX local group. The information on this site should never be used for real-world flight planning or operations.

Unless otherwise noted, all content on this site is copyright © 1999-2007 VATSIM's ZJX ARTCC. All Rights Reserved. The views, opinions and information expressed in the forums and in other areas of this web site are those of their respective authors, and do not necesarilly reflect the views, opinions or information available to the ZJX ARTCC staff, VATUSA staff or VATSIM staff.

This page was generated on Fri Jan 9th, 2009 at 13:16:23 UTC.